X10 Receiver Modules respond to X10 Home Automation signals sent by X10 transmitters and interfaces, allowing you to automate your lighting and appliances. An X10 Receiver responds to signals by turning on, off, dimming or brightening a light, appliance or other device.
X10 receivers can be used to automate plug-in / wired-in lights, appliances, curtain motors, HVAC equipment - you can automate almost anything with X10 Home Automation!
The X10 Receiver Modules category contains the following sub-categories:
Looking to expand your existing X10 Winplus Starter Kit or X10 Starter Pack? Add on these DIY X10 Home Automation Receivers and you'll be able to control extra lights and appliances around your home.
This selection of Receivers are simple to install DIY modules that don't require an electrician. Simply plug them into a power point or position them into an overhead light socket or lamp.
Add DIY X10 control to your conventional overhead lights with the X10 screw fitting socket module receiver.
Dim your lighting to suit your mood by adding dimmable receivers to your X10 home control system. Dimmable receiver modules are X10 receiver modules that are connected to your lights. They receive X10 signals sent by X10 transmitters and interfaces and then respond to those signals by turning on/off, dimming or brightening the connected light.
There is a range of dimmable receivers available to suit different applications, from DIY plug in models to those requiring professional installation.
Turn on and off your appliances and non-dimmable lighting as your heart desires by adding our appliance receivers to your X10 home control system. Appliance receivers are X10 receiver modules that are connected to your home's devices. They receive X10 signals sent by transmitters and interfaces and respond by turning on or off the device.
There is a range of appliance receivers available to suit different applications, from DIY plug-in models to those requiring professional installation. They can be used to automate lamps, electric blankets, heaters, towel rail heaters, plug-in air conditioners - basically anything that uses electricity.
With an X10 Motor Control Receiver any X10 Transmitter can be used to control your motorised curtains/blinds, projector screens, outdoor window shutters and more.
Some motors such as garage doors can be activated by a voltage-free momentary contact closure. Our X10 UM7206 Universal Module below can do exactly that - letting you control your garage roller door as part of your X10 system.
Some heavy duty Dry-Contact receivers are also available, including our RI304 and RB204. Although our dry-contact receivers plug into the mains 240V a.c. they actually don't actually have a 240V a.c. output - their built in relay will switch whatever voltage you feed into it (great for applications using non-mains voltage).
The Rain8 is an 8 zone irrigation controller that can be controlled with X-10 Interfaces and Transmitters. This 2-way model can report status back to the controller for extra reliability.
The Rain8NET is a professional 8-zone sprinkler controller module that is controlled via RS232. It is capable of driving standard 24VAC irrigation valves directly and is modular, allowing expansion of up to 2040 irrigation zones.
