Add INSTEON control to a plug-in appliance with the Plug-In Relay (On/Off) module. Can be controlled by any INSTEON controller.
- Add INSTEON control to your plug-in on/off devices
- Control your devices from anywhere in your home, or world!
- Super-quiet ON/OFF relay operation
On/Off Lighting Control
Plug and Play
The Plug-In Relay (On/Off) lets you turn on & off plug-in appliances using any INSTEON Controller.
With the Plug-In Relay (On/Off), you can quickly add remote control to any plug-in appliance or non-dimmable light in your home.
Add INSTEON control to any of these (to name but a few):
- Plug-in air conditioners
- Fountains & pool pumps
- Heated towel rails
- Electric blankets
- Plug-in fans
- Plug-in heaters
- Non-dimmable lamps
- Coffee makers
- many more!
How it works:
Plug the module into any standard power outlet and then plug the device that you want to control into the module. Pair or add the module to your INSTEON Controller and then you're done...it�s that easy!
|Product Name:||INSTEON Plug-In Relay (On/Off)|
|Regions:||Australia and New Zealand|
|In the box:||INSTEON Plug-In Relay (On/Off)|
|INSTEON Powerline Mesh Repeater:||Yes|
|INSTEON RF Mesh Repeater:||Yes|
|Status LED:||Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software)|
|LED brightness:||Adjustable from off to 100% bright|
|Beep on button press:||Beeps red to indicate traffic (must be enabled via software)|
|Commands supported as controller:||On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim|
|Commands supported as responder:||On / Off, Fast On / Fast Off, Beep|
|RF range:||Up to 50 meters feet open air|
|Phase detect beacon:||Yes|
|X10 addresses:||Any 1 of 256 (unassigned by default)|
|INSTEON device category:||0x02 appliance module|
|INSTEON device subcategory:||AUS / NZ (921.0 Mhz), 0x36|
|Mounting:||Standard AC power outlet||Casing:||UV stabalized plastic (INSTEON White)||Set button:||Yes||Beeper:||Yes||Beep on button press:||Optional (off by default)||LED:||1 RGB|
|Dimensions:||43mm W x 108mm H x 35mm D|
|Weight:||130g � 10g|
|Operating Conditions:||Indoors, 0� C to 40� C, up to 90% relative humidity|
Similar products to the Insteon Plug-In Relay (On/Off):
Inline On/Off Responder that adds INSTEON control to a fixed on/off appliance or non-dimmable lighting zone. Requires installation by a qualified electrical contractor.
Add INSTEON control to a plug-in dimmable light up to 300W. Features an adjustable ramp rate, preset dim level and local control. Can be controlled by any INSTEON controller.