Add INSTEON control to a plug-in dimmable light up to 300W. Features an adjustable ramp rate, preset dim level and local control. Can be controlled by any INSTEON controller.
- Control a plug-in light with INSTEON
- Works with dimmable loads up to 300 Watts max
- Suitable for incandescent lights and dimmable transformers
Insteon Responder
Dimmable
32 Dimming Steps
Dual-mesh technology
Plug and Play
The simplest option for adding INSTEON control to your plug-in lamps.
The INSTEON Plug-In Dimmer (Dual-Band) is a full-featured plug-in dimmer that can be remotely controlled by any INSTEON controller. This simple-to-use plug-in dimmer has advanced features, including:
- Adjustable ramp rate that slowly brings the lamp on
- Preset dim level that stores your preferred choice of 32 brightness levels when turning the lamp on
- Retain local, manual control via a control switch on the module
Installation is easy, simply plug the module into a power point and then connect a lamp or other light fitting up to 300W max into the module. You'll then have control of the light from any INSTEON Controller, including automated control, scenes, or control over the web via your computer or smartphone.
This product is not suitable for fluorescent, low-energy lights or appliances as attempting to dim these devices may damage the module or your device. For these applications, use the INSTEON Plug-In Relay (On/Off) module, or other type of INSTEON relay module.
Specifications:
General |
� |
| Product Name: | INSTEON Plug-In Dimmer |
| Product Code: | 2632-522 |
| Regions: | Australia and New Zealand |
| In the box: | INSTEON Plug-In Dimmer |
INSTEON |
� |
| INSTEON Powerline Mesh Repeater: | Yes |
| INSTEON RF Mesh Repeater: | Yes |
| INSTEON Controller: | Yes |
| INSTEON Responder: | Yes |
| Maximum links/scenes: | 400 |
| Load brightness levels: | 32 locally (256 with software) |
| Status LED: | Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software) |
| LED brightness: | Adjustable from off to 100% bright |
| Local on-level: | Adjustable from 32 fixed brightness levels or resume dim |
| Local ramp rate: | Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) |
| Beep on button press: | Beeps red to indicate traffic (must be enabled via software) |
| Commands supported as controller: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim |
| Commands supported as responder: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim, Incremental brighten / Incremental dim, Beep |
| Software configurable: | Yes |
| RF range: | Up to 50 meters feet open air |
| Phase detect beacon: | Yes |
| X10 support: | Yes |
| X10 addresses: | Any 1 of 256 (unassigned by default) |
| INSTEON device category: | 0x01 dimmable lighting control |
| INSTEON device subcategory: | AUS / NZ (921.0 Mhz), 0x12 |
Mechanical |
� |
| Mounting: | Standard AC power outlet | Casing: | UV stabalized plastic (INSTEON White) | Set button: | Yes | Beeper: | Yes | Beep on button press: | Optional (off by default) | LED: | 1 RGB |
| Dimensions: | 43mm W x 108mm H x 35mm D |
| Weight: | 130g � 10g |
| Operating Conditions: | Indoors, 0� C to 40� C, up to 90% relative humidity |
Electrical |
� |
| Voltage: | 100VAC to 240VAC (� 10%) |
| Frequency: | 50/60Hz auto-detected at power-up |
| Max. load: | 300 W at 240VAC |
| Load types: | Lighting: Incandescent, dimmable LED, dimmable CFL, dimmable halogen |
| User replaceable fuse: | Yes |
| Retain all settings without power: | Yes, saved in non-volatile EEPROM |
| Standby power consumption: | <0.75W |
| Safety approved: | Approved for use in Australia and New Zealand |
| Certifications: | AS/NZS 4268, CISPR 22, IEC 60669-2-1 |
Similar products to the Insteon Plug-In Dimmer:
DIN-Rail Dimmer
Inline Dimmable Responder that adds INSTEON control to overhead lights. Requires installation by a qualified electrical contractor.
