Meet INSTEON home automationMount your flat screen on the wall

Customer comment:

"Thank you very much for your great service, it is so good to see that some places still operate this way."

David from St Peters Australia

Overview of X10 Transmitters and Interfaces

Your choice of X10 Transmitters Modules and Interfaces is where you get to really choose the power of your Home Automation system. Transmitters and Interfaces send X10 signals along the powerlines to your X10 Receivers, which then switch or dim a light or appliance. Multiple X10 Transmitters can be installed in your home automation system, each providing unique functionality.

The most basic X10 Home Automation system is 1 x X10 Transmitter plus 1 x X10 Receiver. After you choose your transmitter below the next step is to view our X10 Receivers category.

Click on this link if you're looking for X10 remotes and wireless devices.

Sub-categories:

The X10 Transmitters and Interfaces category contains the following sub-categories:

Programmable X10 Transmitters

Adding a Programmable Transmitter interface is the key to extracting the full potential from your X10 home automation system. As well as being able to send and receive X10 you can also program sequences, macros and moods for your home.

For example - a computer module could receive a signal that your garage door has just opened as you've just arrived home. The signal triggers the coming home sequence programmed in the interface, which then transmits to numerous receiver modules to turn on the front verandah lights, start the heating and commence playing your music playlist - all without pressing a single button!

Your programmable interface can also be used to create events and sequences that are triggered by time of day, dawn/dusk (+/- offset) and more.

CM15 X10 Activehome Pro PC Interface with RF

CM15 X10 Activehome Pro PC Interface with RF

USB X10/RF Interface with ActiveHome PRO software

$139.00

PreviewFull Detail Code: CM15 Add to cart

Basic X10 Transmitters / Controllers

In order to interact with your X10 home control system, you`ll need one or more transmitters. Our home control transmitters send signals to receivers, which then turn on/off/dim or brighten a connected light or appliance.

In conjunction with programmable modules, transmitter modules can also be used trigger scenes and ambient lighting moods in your home. One button press on a wall switch transmitter or bedside timer can therefore trigger a whole series of commands, putting your home into the desired mode.

These Do-It-Yourself plug-in transmitters are a simple to install way to control your X10 Home Control system.

Plug-in X10 Bench Top Controller

Plug-in X10 Bench Top Controller (HA111)

Control up to 8 different lights, appliances or macros with this simple to use desktop mini-controller. Turn on/off your TV, stereo system, radio, fan or other appliances anywhere in your home.

Now only$33.00

PreviewFull Detail Code: MC10 Add to cart
LCD Bedside/Desktop Timer Controller

LCD Bedside/Desktop Timer Controller (HA110)

The new MT12 is a new X10 bedside/desktop transmitter great for one touch control of your X10 receivers. It has a built-in timer enabling use as an alarm clock (with buzzer), the ability to schedule X10 control and can also automatically control your X10 receivers randomly to simulate occupancy whilst you're away.

Now only$49.50

PreviewFull Detail Code: MT12 Add to cart
SM10 X10 Universal Transmitter

SM10 X10 Universal Transmitter (HA118)

The Smart Interface is a universal transmitter which can interface with many devices through 2 screw terminals. When connected to an alarm system output or reed switch, it can flash X10 enabled lighting. It can also be used to turn on lights or trigger macros when (for example) a garage door opens.

Now only$59.00

PreviewFull Detail Code: SM10 Add to cart
CM15 X10 Activehome Pro PC Interface with RF

CM15 X10 Activehome Pro PC Interface with RF

USB X10/RF Interface with ActiveHome PRO software

$139.00

PreviewFull Detail Code: CM15 Add to cart

Advanced X10 Transmitters & Switches

In order to interact with your X10 home control system, you`ll need one or more transmitters. Our home control transmitters send signals to receivers, which then turn on/off/dim or brighten a connected light or appliance.

In conjunction with programmable modules, transmitter modules can also be used trigger scenes and ambient lighting moods in your home. One button press on a wall switch transmitter or bedside timer can therefore trigger a whole series of commands, putting your home into the desired mode.

These wired-in modules and wall switches require professional installation and add convenient control options to your X10 Home Automation system.

Multi-function Interface Micromodule

Multi-function Interface Micromodule

X10-ADVanced 4-address transmitter with four potential-free inputs. Transmitter only, does not control a load. Replaces DIX1 and DIX2.

$132.00

PreviewFull Detail Code: IMX10 Add to cart
X10-ADV MicroModule Mains Interface

X10-ADV MicroModule Mains Interface

Mains power interface. This unit sends X10 commands based on the status of the 240V input connected to it.

$148.50

PreviewFull Detail Code: AIX12 Add to cart
X10 2-Way Interface Module

X10 2-Way Interface Module (HA124)

Interfaces third party X-10 compatible hardware to the X-10 - such as alarm controllers, Adicon and other home automation systems.

$69.00

PreviewFull Detail Code: XM10 Add to cart

RF / IR to X10 Interfaces

As X10 signals are sent along the electrical wiring of the home, remote controls and other wireless devices can not directly control X10 Receivers - they can't because your wireless devices are not plugged into the power.

In order to use an X10 compatible RF or IR wireless device with your system, you'll need a IR-to-X10 or RF-to-X10 Interface. These devices receive either the RF or IR signals from your wireless device and in-turn transmit the corresponding X10 signal.

RF/IR to X10 Interfaces can be used for using your X10 wireless devices and remotes to control the X10 system, and also allow you to use a number of other products to control X10, such as:

  • X10 RF wireless devices
  • Philips Pronto IR remote
  • Logitech Harmony universal remote
  • Environment control units for wheelchairs etc
  • Philips Pronto IR remote
  • Many more...

X10-Adv IR to X10 Interface

X10-Adv IR to X10 Interface

X10-Adv wired IR to X10 module. Receives IR signals and in turn sends out X10/A10 commands.

Now only$156.00

PreviewFull Detail Code: IRIX35 Add to cart
X10-Adv RF to X10 Interface

X10-Adv RF to X10 Interface

X10-Adv RF to X10 transceiver interface. Receives RF signals and in turn sends out X10/A10 commands.

Now only$169.00

PreviewFull Detail Code: RFIX35 Add to cart
CM15 X10 Activehome Pro PC Interface with RF

CM15 X10 Activehome Pro PC Interface with RF

USB X10/RF Interface with ActiveHome PRO software

$139.00

PreviewFull Detail Code: CM15 Add to cart
X10 RF to X10 TM13 Transceiver Module

X10 RF to X10 TM13 Transceiver Module (HA114)

Interfaces up to 16 RF devices and remotes to your X10 system. Also doubles as a plug-in appliance Receiver module.

Now only$49.00

PreviewFull Detail Code: TM13 Add to cart
IR7243 IR+RF to X10 Interface

IR7243 IR+RF to X10 Interface

The IR7243RF is similar to our standard IR7243 but also features an RF interface (similar functionality to TM13). The IR7243RF is used to interface 3rd party IR remotes with X10.

$99.00

PreviewFull Detail Code: IR7243RF Add to cart
All House Code RF to X10 Interface

All House Code RF to X10 Interface (HA136)

The V572AE RF Transceiver Interface provides an alternative to the TM13 that receives on all 16 house codes and provides greater reception range.

$225.50

PreviewFull Detail Code: V572AE Add to cart